Correct Use of Fire Lights

Fire Truck Spotlights play a very important role in the working process. Today, let's take a look at the correct use of Fire Truck Scene Lights.

Driving lights: indicate the orientation

In the first gear of the light switch, all the instrument lights in the car will be on, and the front and rear of the fire truck will also be on. The brightness of these two lights is not large, mainly to make the four corners of the car body visible. Generally, the running lights should be turned on when it is getting dark, rainy, or in dark places such as the underground parking lot.

Low beam lamp of fire engine: it depends on it at night

Used when driving in urban areas at night. On the one hand, the roads in the city are illuminated by street lamps. There is no need for high beam lamps to probe the road in the distance. You only need to see the road conditions in front of the car; On the other hand, there is a large traffic flow on urban roads. If you turn on the distant light, it will not only dazzle the drivers on the opposite side when meeting but also affect the line of sight of pedestrians on both sides of the road.

High beam lamp of fire truck: suitable for wilderness

It is suitable to use high beam lamps in the wilderness or on the highway without street lamp lighting, but when meeting, you should change back to low beam to avoid dazzling the driver opposite. When the high beam light is on, a striking blue light will light up on the instrument panel in the vehicle as a reminder.

Turn signal: remember to use it

The most basic purpose of the turn signal is to give the turning signals of other vehicles and passers-by when the vehicle turns, to remind others to pay attention. Sometimes, the turn signal lamp can also be used as lighting in narrow places, so that the driver can observe the obstacles on both sides. When the turn signals on both sides are turned on at the same time, it plays the role of warning and width indication.

Firetruck fog lamp: bad weather helper

As the name suggests, a fog lamp is a light signal used in heavy rain and fog weather. The penetration of fog lamps in fog is stronger, so it is easier for vehicles and pedestrians to notice it as soon as possible.

Reversing lamp of fire truck: reduce the blind area of reversing

When reversing, a white reversing lamp will light up at the rear of the car. On the one hand, it can illuminate the road and obstacles at the rear of the car and reduce the blind area when reversing. On the other hand, it is also a reminder to pedestrians at the rear of the car.

Check bulb precautions

During normal use and routine maintenance, the driver shall pay attention to frequently check whether the night running side marker lamp, fog lamp, and brake lamp work normally. If the bulb turns black, it shall be replaced in time.

Carry the bulb for standby

Drivers should understand the instructions, keep in mind the structure of bulbs and sockets, and make preparations in advance to cope with temporary conditions. Among various types of bulbs, if conditions permit, the spare parts of the brake lamp and direction indicator lamp shall be prepared.

Judge the cause of fog in the lamp

If the dust cover of the lamp is cracked, it is easy for rainwater to enter the lamp when driving, and water mist will be formed in the lamp cover. Once the lamp enters the water, the brightness will be affected, and the circuit plug may be corroded, causing damage to the lamp. At this time, the driver can open the lamp dust cover and turn on the headlights. After turning on the headlights for 10 minutes, the water mist in the headlights begins to disappear and can completely disappear after 1 hour. The after-sales service needs to be done professionally.

If you are looking for the Fire Lights For Truck, we hope to be your first choice.