Do You Know the Advantages of Pneumatic Telescopic Mast?

The pneumatic telescopic mast can replace hydraulic, screw rods, and other telescopic devices due to its synchronous expansion of multiple sections, high load, high adaptability, low failure rate, low sloshing rate, and other characteristics. It has a very broad application prospect in lifting and erecting fields.

Advantages of pneumatic telescopic mast

• Low failure rate

The mast is made of aluminum alloy and driven by air pressure. The internal cylinder is simple in structure. The failure rate is far lower than that of other driving methods. It is also easy to use and maintain. However, other internal structures are complex, which is very easy to cause wire rope winding, and it is difficult to lower when it is lifted.

• Light deadweight

Gear, steel wire, and other accessories are reduced internally, and air pressure is used as power without increasing the weight of dead weight.

• Good sealing, dustproof and sand proof

Pneumatic telescopic mast has high requirements for sealing, so good sealing can effectively reduce sand, gravel, etc. entering the mast and scratching the surface of the mast.

• Small wind swing

As the pneumatic telescopic mast adopts a high-sealing protective ring, the mechanical clearance between sections is very small. When the rod is lifted, it has high stability and is not easy to shake.

• Strong environmental adaptability

The mast is made of aluminum alloy, stainless steel, and other materials, and its surface is anodized to prevent corrosion, rust, salt water, immersion, and ultraviolet radiation.

• Heavy load

The maximum load of the pneumatic lifting rod can reach 500 kg, while the other rods are about 200 kg.

• High security

The pneumatic lifting rod adopts pneumatic lifting, and there is air pressure protection inside the rod body. In case of an accident, there is air pressure buffer protection. It will not fall directly from a height of more than 10 meters. Other rods are different. Because the steel wire rope is used internally, the steel wire is easy to break due to the high load and the dead weight of the rod after being lifted.

Looking for a pneumatic telescopic mast for sale, plz feel free to contact us.