How to Choose a Security Camera Pole

In general, the monitoring rod is still mainly used for monitoring. By implementing synchronous monitoring of people's travel and traffic conditions, it can provide good guidance for people's travel. So how to choose the material of the monitoring rod?

What is the commonly used material for Security Camera Poles?

Monitoring rods usually come in two materials, one is a more traditional steel pipe material monitoring rod, and the other is a more expensive stainless steel monitoring rod. In fact, as long as they are used normally, these two monitoring rods can be used for more than 20 years, but the two materials are also slightly different.

Stainless Steel Monitor Pole v.s. Iron Monitor Pole

?Similarities：

What stainless steel monitoring poles and iron monitoring poles have in common is that the matching brackets for the cameras are strong wind and shock resistant. They are all produced according to the anti-corrosion and rust-proof ability, they also meet the characteristics of beauty and practicality.

?Differences:

• The sizes of stainless steel monitoring rods and iron monitoring rods have some changes. Stainless steel is usually small in size. Usually, 90 pipes, 115 pipes, etc., can only make the octagon material made of iron material. Therefore, the monitoring rod of iron material is more variable.

• The price is different. The price of stainless steel is several times the price of iron, especially the price of 304 stainless steel is expensive, if the production of stainless steel monitoring rods will be several times the price of iron.

• The stainless steel monitoring rod is not as hard as the iron monitoring rod. Stainless steel monitoring poles have low hardness and insufficient wind and impact resistance. Therefore, stainless steel monitoring poles are generally used for community safety monitoring, while urban road monitoring projects are generally not used.

• Stainless steel does not need galvanized spraying anti-corrosion and anti-rust treatment. The stainless steel monitoring rod itself has strong anti-corrosion and anti-rust ability, and the process is simpler than that of iron. However, due to the anti-corrosion and anti-rust properties of stainless steel itself, the market price of stainless steel is relatively high.

Surveillance poles are generally a material used for the installation of outdoor surveillance cameras. If it is a column support road monitoring, it is usually made with a height of 6 meters and a horizontal arm of 1 meter, so that the production height is relatively high and the monitoring can be farther, which is its basic function.

Construction points and purchase points of monitoring poles

Surveillance poles protect our daily lives. So what are the construction points and purchase points of monitoring poles?

The monitoring pole is mainly used as a public facility, so the requirements for safety performance are relatively high, not only to be able to meet the role of installing cameras, but also to have the role of decoration and safety.

When installing the outdoor security camera pole, the first step is to temporarily fix the reinforcing bars of the foundation, and at the same time make sure that the foundation top plate of the reinforcing bar is suitable for plane-parallel, and directly use a ruler to measure in two directions perpendicular to the foundation top plate. Then it must be determined that the air bubbles must be centered, and the requirement for the concrete is that it must be very dense and cannot appear hollow.

Where the monitoring rod is located at the pre-embedded pipe mouth, it should be sealed with plastic paper or other materials in advance, so as to prevent the concrete from leaking into the pre-embedded pipe during pouring and tamping, and blocking the pre-embedded pipe will not work.

And after the foundation is poured and smashed, the foundation surface must be between five and ten meters above the ground level, and the poured concrete needs to be maintained for a period of time to ensure its installation strength. Metal sense must be grounded.

In conclusion

As a bracket for outdoor surveillance cameras, the surveillance pole plays a very important role in surveillance. Its main function is to meet the installation of the camera on the one hand, and to ensure personal safety on the other hand, so its quality is also very important.

First of all, the high-quality monitoring poles are made of high-quality seamless steel pipes, and the main poles are generally very resistant to compression. Therefore, you should pay attention to the material of the monitoring poles when purchasing. Secondly, when purchasing, we must pay attention to the pipe wall of the monitoring pole. Generally, the pipe wall of the better quality monitoring pole has a certain thickness, so that the wind resistance and pressure bearing capacity will be better.

Thirdly, in order to facilitate installation, when purchasing Pole For Security Camera, you must choose the ones with high flexibility and simple operation and installation.

We are Cctv Camera Pole Supplier, if you want to Buy Security Camera Pole, we will be your best choice.