Manual/electric lift mast Vehicle communication antenna lighting support pole customization
June 17,2022
antenna mast telescopic group,buy 10ft antenna mast,cctv antenna mast pole
Compared with similar products, the vehicle-mounted antenna mast telescopic group device has the characteristics of fast lifting speed, high reliability, strong durability, safety and stability, light weight, small closing height, and easy portability. There are two types of lifting methods: manual and electric. The vehicle antenna mast telescopic group can be raised to a height of 3-20 meters, and the closed height is 1.2-3 meters. The weight of the main pole is 15Kg-45Kg.
It is widely used in emergency lightning protection for the army, public security, fire protection, construction, field construction, large-scale cultural and sports activities, disaster relief and other emergencies.
The use of the truck-mounted cctv antenna mast pole can also make the installation and maintenance of aviation obstruction lights safe and convenient. The vehicle-mounted lightning protection device system consists of a vehicle-mounted cctv antenna mast pole and a grounding device. The cctv antenna mast pole includes: an insulating jacket vertically fixed on the vehicle, an insulating inner jacket fixed in the jacket cavity, and encapsulated in the inner jacket A pair of non-inductive windings that are wound on the insulating rods in the sleeve in opposite spirals and are connected in parallel;
2. Technical indicators
1.buy 10ft antenna mast Collection height: customized according to customer requirements
2.Buy 10ft antenna mast total height: customized according to customer requirements
3.Buy 10ft antenna mast installation method: customized according to customer requirements
4.Buy 10ft antenna mast material: high-strength aluminum-magnesium alloy profiles are used, which are strong and corrosion-resistant; the inner wall of the cylinder is sealed and connected by a high-pressure wear-resistant ceramic treatment process. ;
5. Pressure-holding performance: high-level sealing performance, the 24-hour lift mast slides less than 10mm in a static state. It adopts the piston swing stroke and air stroke structure. The heavy piston of this structure is made of high-strength graphite-containing PTFE material; all transmission systems are closed, and there is a rubber sealing ring between the rod body and the rod body for sealing, which has good waterproof and sandproof performance. , strong anti-corrosion ability;
6. Surface treatment: hard oxidation increases the strength of aluminum-magnesium alloy profiles;
7.Antenna mast telescopic group wind resistance: Our rod body adopts circular section, in the same installation space, the circular section can provide higher strength, rigidity, torsion resistance and bending resistance; wind resistance level 8; With anti-rotation function., working pressure: <0.30 Mpa;
8. The antenna mast telescopic group has a built-in wire structure; our company first realized that the equipment control wire and power wire were fixed inside the lift rod, and it was the first in China to realize the internal wiring of the lift rod, which was further in terms of appearance and performance.
9. The vehicle antenna mast telescopic group is fixed on the roof of the vehicle, or installed around the vehicle, and fixed by the combination of the tray and the support frame. When the customer equipment is selected, the original height of the vehicle-mounted lifting mast should be determined according to the height of different types of installation surfaces to the top. As a result, when the product is installed on the top, its original height is the shortest, so as to ensure the maximum height passability of the car body and minimize the wind resistance of the equipment.