Mobile communication antenna lift pole Portable monitoring lighting telescopic pole
June 17,2022
street pole telescopic cctv mast
One: product overview
street pole telescopic cctv mast It is an elevated equipment carrier, suitable for vehicle, ship or land. It can quickly, reliably and safely raise equipment such as communication antennas, lighting, lightning protection, light transmission and cameras to a predetermined height. After the work is completed, the above-mentioned equipment can also be lowered to a predetermined height quickly, reliably and safely.
The company's manual lifting rod products are made of high-strength aluminum alloy, which has the advantages of corrosion resistance, light weight, large load, low noise, fast lifting, low shock resistance, and stability. It can meet the requirements of height and load in different fields and occasions. In addition, the company's products are also widely used in golf, large football field night lighting and so on.
Two: working principle
The street pole telescopic cctv mast system adopts screw drive or wire rope drive, which has good self-locking performance and can realize reliable self-locking at any position, which improves the safety and reliability.
Three: Instructions for use
1.street pole telescopic cctv mast for vertical use: the lift pole can be installed on the ground or on the vehicle. No matter where it is installed, make sure that the boom is vertical to the ground when in use. If the lifting rod is inclined, it will affect the lifting and lowering effect of the lifting rod; if the lifting rod is seriously inclined or tilted for a long time, it will also cause damage and danger to the lifting rod.
2. Street pole telescopic cctv mast cable fixation: The lifting pole needs to be installed on a fixed object, which cannot be shaken, such as walls, carriage bodies, foundation piles, etc. There must be at least two fixed points for installation, one of which is on the rod body of the lifting rod, and the distance between the two points should be greater than 2/3 of the height of the lifting rod. The connection should be firm and reliable.